Address：No. 1381 Xitang Avenue, Xitang Town, Jiashan County, Zhejiang Province
Website : en.mkhhj.com
The mixer belongs to one of the four main engines of the feed equipment. Its working principle consists of two rotors with opposite rotation directions. The rotor is welded with a plurality of blades with special viewpoints. The blade material is counterclockwise along the inner wall of the machine slot. Rotating; on the one hand, the animal material is flipped left and right; at the overlap of the two rotors, a weightless zone is formed, in which the material can be floated regardless of the shape, size and density of the material, and is in an instantaneous weight loss condition, This causes the materials to form a continuous cycle in the machine slot, interweaving and shearing, and then achieve a rapid soft mixing effect.
In the process of production and use, the common problems of the mixer are as follows:
First, one is the leakage of the mixer door. The reason is that the source pressure of the on-site pneumatic triple-link parts is insufficient. Need to increase the source pressure; the other is the leakage of the mixer door. The reason is that the door silicone seal gap is too large. Adjust the gap between the seal and the door by means of the gasket.
2. Abnormal noise occurs in the slot of the mixer blade. The reason is that when the device is installed, the force is uneven or bumped during the lifting process, causing the blade to rub against the machine slot, and a sound is generated. The treatment method is: in the case of power failure, remove the motor hood, move the fan blades of the motor, open the observation door of the mixer, observe the bumps, find and polish with a sander.
Third, the mixer shaft end leakage. The reason is that the shaft end seal is filled with the oil-filled packing in the through-cover. When used for a period of time, there is a gap between the main shaft and the packing, which causes powder leakage. The solution is: the shaft cap bolt can be locked again for the first time. If the locking bolt can no longer be locked, the gland bolt can be loosened, the gland can be retracted, the packing in the through cover can be taken out, and the new packing can be refilled to meet the requirements of the shaft end seal.
The above problems require the maintenance personnel to pay attention to the daily inspections, familiar with the treatment methods, and can deal with them quickly when problems occur, so as not to delay the production, so as to improve the production power.
Meike Machinery Co., Ltd. is a mixer manufacturer mainly engaged in research, development, production, marketing and service of high quality mixer mixing machinery. It is widely used in chemical industry, chemical fertilizer, oil field, oil refining, pesticide, veterinary drug, paint, pigment, dye and auxiliary agent. Metallurgy, smelting, refractory, mining, building materials, electronic plastics, feed, aquaculture, medicine, bioengineering, food, ceramics, glass and new materials, nuclear energy materials and other industries.
Meike Machinery Co., Ltd. will be based on the market, focus on the future, and keep making progress. We sincerely welcome customers at home and abroad to visit our company, conduct business negotiations, discuss together, and create a better future. Welcome to inquire: 13917355666